4 inch inlet large cyclone with inlet on the left


These cyclones are approx. 37 inches tall, 16 inches in diameter, 4 inch inlet on side, 6 inch discharge on top and a 6 inch discharge on bottom with a flange and 8 holes for mounting. This unit can be used with a dust collector in the 650 cfm to 3000 cfm range. With the 4 inch inlet this unit will give you high velocity at long distances. If you would like to build a cyclone tower with your dust collector fan motor you should make sure that the incoming air flow of your cyclone is going in the same direction as your fan motor. The following are a few examples of dust collector fan motors that you would use with this left hand inlet cyclone if you were building a tower: Jet DC-1100, Jet DC-1200, Jet DC-1900, Powermatic PM1300, Powermatic PM1900, Craftsman 1 1/2hp and Delta 50-850. If you are just using the cyclone with a dust collector connected with flex hose, and not close, it doesn't matter which side the inlet on the cyclone is located. If you order your cyclone from this page you will receive a cyclone with the inlet on the left hand side.